my environment is AWS EC2 AMI.
When I first installed Heimdall, I waited for blocks to sync without a snapshot, but the above error occurred.
I tried again after install rabbitmq, but it didn’t work, so I took a snapshot and ran it again, and the following error occurred. What should I do?
I tried unsafe-reset-all before, but same issue occured this time too
this is my setting files
# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml
##### main base config options #####
# TCP or UNIX socket address of the ABCI application,
# or the name of an ABCI application compiled in with the Tendermint binary
proxy_app = "tcp://127.0.0.1:26658"
# A custom human readable name for this node
moniker = "ip-10-10-0-73.ap-northeast-2.compute.internal"
# If this node is many blocks behind the tip of the chain, FastSync
# allows them to catchup quickly by downloading blocks in parallel
# and verifying their commits
fast_sync = true
# Database backend: goleveldb | cleveldb | boltdb
# * goleveldb (github.com/syndtr/goleveldb - most popular implementation)
# - pure go
# - stable
# * cleveldb (uses levigo wrapper)
# - fast
# - requires gcc
# - use cleveldb build tag (go build -tags cleveldb)
# * boltdb (uses etcd's fork of bolt - github.com/etcd-io/bbolt)
# - EXPERIMENTAL
# - may be faster is some use-cases (random reads - indexer)
# - use boltdb build tag (go build -tags boltdb)
db_backend = "goleveldb"
# Database directory
db_dir = "data"
# Output level for logging, including package level options
log_level = "main:info,state:info,*:error"
# Output format: 'plain' (colored text) or 'json'
log_format = "plain"
##### additional base config options #####
# Path to the JSON file containing the initial validator set and other meta data
genesis_file = "config/genesis.json"
# Path to the JSON file containing the private key to use as a validator in the consensus protocol
priv_validator_key_file = "config/priv_validator_key.json"
# Path to the JSON file containing the last sign state of a validator
priv_validator_state_file = "data/priv_validator_state.json"
# TCP or UNIX socket address for Tendermint to listen on for
# connections from an external PrivValidator process
priv_validator_laddr = ""
# Path to the JSON file containing the private key to use for node authentication in the p2p protocol
node_key_file = "config/node_key.json"
# Mechanism to connect to the ABCI application: socket | grpc
abci = "socket"
# TCP or UNIX socket address for the profiling server to listen on
prof_laddr = "localhost:6060"
# If true, query the ABCI app on connecting to a new peer
# so the app can decide if we should keep the connection or not
filter_peers = false
##### advanced configuration options #####
##### rpc server configuration options #####
[rpc]
# TCP or UNIX socket address for the RPC server to listen on
laddr = "tcp://127.0.0.1:26657"
# A list of origins a cross-domain request can be executed from
# Default value '[]' disables cors support
# Use '["*"]' to allow any origin
cors_allowed_origins = ["*"]
# A list of methods the client is allowed to use with cross-domain requests
cors_allowed_methods = ["HEAD", "GET", "POST", ]
# A list of non simple headers the client is allowed to use with cross-domain requests
cors_allowed_headers = ["Origin", "Accept", "Content-Type", "X-Requested-With", "X-Server-Time", ]
# TCP or UNIX socket address for the gRPC server to listen on
# NOTE: This server only supports /broadcast_tx_commit
grpc_laddr = ""
# Maximum number of simultaneous connections.
# Does not include RPC (HTTP&WebSocket) connections. See max_open_connections
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
# 1024 - 40 - 10 - 50 = 924 = ~900
grpc_max_open_connections = 900
# Activate unsafe RPC commands like /dial_seeds and /unsafe_flush_mempool
unsafe = false
# Maximum number of simultaneous connections (including WebSocket).
# Does not include gRPC connections. See grpc_max_open_connections
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
# 1024 - 40 - 10 - 50 = 924 = ~900
max_open_connections = 900
# Maximum number of unique clientIDs that can /subscribe
# If you're using /broadcast_tx_commit, set to the estimated maximum number
# of broadcast_tx_commit calls per block.
max_subscription_clients = 100
# Maximum number of unique queries a given client can /subscribe to
# If you're using GRPC (or Local RPC client) and /broadcast_tx_commit, set to
# the estimated # maximum number of broadcast_tx_commit calls per block.
max_subscriptions_per_client = 5
# How long to wait for a tx to be committed during /broadcast_tx_commit.
# WARNING: Using a value larger than 10s will result in increasing the
# global HTTP write timeout, which applies to all connections and endpoints.
# See https://github.com/tendermint/tendermint/issues/3435
timeout_broadcast_tx_commit = "10s"
# Maximum size of request body, in bytes
max_body_bytes = 1000000
# Maximum size of request header, in bytes
max_header_bytes = 1048576
# The path to a file containing certificate that is used to create the HTTPS server.
# Migth be either absolute path or path related to tendermint's config directory.
# If the certificate is signed by a certificate authority,
# the certFile should be the concatenation of the server's certificate, any intermediates,
# and the CA's certificate.
# NOTE: both tls_cert_file and tls_key_file must be present for Tendermint to create HTTPS server. Otherwise, HTTP server is run.
tls_cert_file = ""
# The path to a file containing matching private key that is used to create the HTTPS server.
# Migth be either absolute path or path related to tendermint's config directory.
# NOTE: both tls_cert_file and tls_key_file must be present for Tendermint to create HTTPS server. Otherwise, HTTP server is run.
tls_key_file = ""
##### peer to peer configuration options #####
[p2p]
# Address to listen for incoming connections
laddr = "tcp://0.0.0.0:26656"
# Address to advertise to peers for them to dial
# If empty, will use the same port as the laddr,
# and will introspect on the listener or use UPnP
# to figure out the address.
external_address = ""
# Comma separated list of seed nodes to connect to
seeds="[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656"
# Comma separated list of nodes to keep persistent connections to
persistent_peers = ""
# UPNP port forwarding
upnp = false
# Path to address book
addr_book_file = "config/addrbook.json"
# Set true for strict address routability rules
# Set false for private or local networks
addr_book_strict = true
# Maximum number of inbound peers
max_num_inbound_peers = 40
# Maximum number of outbound peers to connect to, excluding persistent peers
max_num_outbound_peers = 10
# Time to wait before flushing messages out on the connection
flush_throttle_timeout = "100ms"
# Maximum size of a message packet payload, in bytes
max_packet_msg_payload_size = 1024
# Rate at which packets can be sent, in bytes/second
send_rate = 5120000
# Rate at which packets can be received, in bytes/second
recv_rate = 5120000
# Set true to enable the peer-exchange reactor
pex = true
# Seed mode, in which node constantly crawls the network and looks for
# peers. If another node asks it for addresses, it responds and disconnects.
#
# Does not work if the peer-exchange reactor is disabled.
seed_mode = false
# Comma separated list of peer IDs to keep private (will not be gossiped to other peers)
private_peer_ids = ""
# Toggle to disable guard against peers connecting from the same ip.
allow_duplicate_ip = false
# Peer connection configuration.
handshake_timeout = "20s"
dial_timeout = "3s"
##### mempool configuration options #####
[mempool]
recheck = true
broadcast = true
wal_dir = ""
# Maximum number of transactions in the mempool
size = 5000
# Limit the total size of all txs in the mempool.
# This only accounts for raw transactions (e.g. given 1MB transactions and
# max_txs_bytes=5MB, mempool will only accept 5 transactions).
max_txs_bytes = 1073741824
# Size of the cache (used to filter transactions we saw earlier) in transactions
cache_size = 4096
# Maximum size of a single transaction.
# NOTE: the max size of a tx transmitted over the network is {max_tx_bytes} + {amino overhead}.
max_tx_bytes = 1048576
##### fast sync configuration options #####
[fastsync]
# Fast Sync version to use:
# 1) "v0" (default) - the legacy fast sync implementation
# 2) "v1" - refactor of v0 version for better testability
version = "v0"
##### consensus configuration options #####
[consensus]
wal_file = "data/cs.wal/wal"
timeout_propose = "3s"
timeout_propose_delta = "500ms"
timeout_prevote = "1s"
timeout_prevote_delta = "500ms"
timeout_precommit = "1s"
timeout_precommit_delta = "500ms"
timeout_commit = "5s"
# Make progress as soon as we have all the precommits (as if TimeoutCommit = 0)
skip_timeout_commit = false
# EmptyBlocks mode and possible interval between empty blocks
create_empty_blocks = true
create_empty_blocks_interval = "0s"
# Reactor sleep duration parameters
peer_gossip_sleep_duration = "100ms"
peer_query_maj23_sleep_duration = "2s"
##### transactions indexer configuration options #####
[tx_index]
# What indexer to use for transactions
#
# Options:
# 1) "null"
# 2) "kv" (default) - the simplest possible indexer, backed by key-value storage (defaults to levelDB; see DBBackend).
indexer = "kv"
# Comma-separated list of tags to index (by default the only tag is "tx.hash")
#
# You can also index transactions by height by adding "tx.height" tag here.
#
# It's recommended to index only a subset of tags due to possible memory
# bloat. This is, of course, depends on the indexer's DB and the volume of
# transactions.
index_tags = ""
# When set to true, tells indexer to index all tags (predefined tags:
# "tx.hash", "tx.height" and all tags from DeliverTx responses).
#
# Note this may be not desirable (see the comment above). IndexTags has a
# precedence over IndexAllTags (i.e. when given both, IndexTags will be
# indexed).
index_all_tags = true
##### instrumentation configuration options #####
[instrumentation]
# When true, Prometheus metrics are served under /metrics on
# PrometheusListenAddr.
# Check out the documentation for the list of available metrics.
prometheus = true
# Address to listen for Prometheus collector(s) connections
prometheus_listen_addr = ":26660"
# Maximum number of simultaneous connections.
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
max_open_connections = 100
# Instrumentation namespace
namespace = "tendermint"
----------------------------------------
# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml
##### RPC and REST configs #####
# RPC endpoint for ethereum chain
eth_rpc_url = "wss://eth-mainnet.g.alchemy.com/v2/e7yOkFBnB8MR68b-HjaQtVyr_c5_7dbx"
# RPC endpoint for bor chain
bor_rpc_url = "http://localhost:8545"
# RPC endpoint for tendermint
tendermint_rpc_url = "http://0.0.0.0:26657"
# Heimdall REST server endpoint
heimdall_rest_server = "http://127.0.0.1:1317"
#### Bridge configs ####
# AMQP endpoint
amqp_url = "amqp://guest:guest@localhost:5672/"
## Poll intervals
checkpoint_poll_interval = "5m0s"
syncer_poll_interval = "1m0s"
noack_poll_interval = "16m50s"
clerk_poll_interval = "10s"
span_poll_interval = "1m0s"
sh_state_synced_interval = "1m0s"
sh_stake_update_interval = "5m0s"
sh_max_depth_duration = "1h0m0s"
#### gas limits ####
main_chain_gas_limit = "5000000"
#### gas price ####
main_chain_max_gas_price = "400000000000"
##### Timeout Config #####
no_ack_wait_time = "30m0s"
##### chain - newSelectionAlgoHeight depends on this #####
chain = "mainnet"
------
#!/bin/bash
/home/bldev/go/bin/heimdalld start --home /data/.heimdalld --chain mainnet &> /data/.heimdalld/logs/heimdall.log &